Sand and Gravel Pump Delivered to Cote d’Ivoire for Sand Pumping

///Sand and Gravel Pump Delivered to Cote d’Ivoire for Sand Pumping

Sand and Gravel Pump Delivered to Cote d’Ivoire for Sand Pumping

Sand and gravel pump, also known as large particle pump, gravel pump, sand pumping equipment, is a modified version of sand pump according to the same kind of products from Australia. Sand and gravel pump is mainly used in dredging project with high over-flow requirements. Sand and gravel pump is suitable for extracting pebbles, stones, domestic garbage, coarse sand and other large particle media. The sand and gravel pump was originally used in industrial and mining enterprises, and later developed into river channel dredging, sand pumping and embankment projects.

Sand and gravel pump has wide flow passage because of unique three-blade impeller; the sand and gravel pump casing and impeller is thickened; over-flow parts are made of high chromium alloy. All of the features ensure that the sand and gravel pump can run stably in long life span and high efficiency.

The sand and gravel pump is not suitable for all working conditions. The sand and gravel pump has less blades and smaller outside diameter of impeller. Comparing with marine sand pump and high head slurry pump, the shaft power of gravel pump is lower. So under the same power ratio, the output of sand and gravel pump is lower than the other two pump types. So the customer needs to consider during the selection process.

In June 2018, a customer from Cote d’Ivoire contacted the foreign trade manager of Ocean Pump. He required the sand and gravel pump should has the following features.

1. The material should be wear resistant alloy. He has used sand pumping machine made in Guangdong, China for river sand pumping, the performance is good, but the wear is faster.

Sand and Gravel Pump Delivered to Cote d'Ivoire for Sand Pumping
Sand Suction Pump Delivered to Cote d'Ivoire for Sand Pumping

2. Wide flow passage. There were pebbles and other large particles in the river.

Gravel Pump Delivered to Cote d'Ivoire for Sand Pumping
Large Particle Pump Delivered to Cote d'Ivoire for Sand Pumping

3. The customer had a set of Perkins diesel engine 550kw/1500rpm in hand, he supplied flywheel size. We shoule match gear box for him.

Sand Pumping Equipment Delivered to Cote d'Ivoire for Sand Pumping
Sand Pumping Machine Delivered to Cote d'Ivoire for Sand Pumping

4. We should supply supra polymer PE discharging pipes and PE floaters.

Slurry Pump Delivered to Cote d'Ivoire for Sand Pumping
Sand and Gravel Pump. Delivered to Cote d'Ivoire for Sand Pumping

5. He required a steel discharge extension. He wanted to separate flow at the end of the pipe, so we designed a “Y”type extension which was matched with valve to control the flow of water.

Sand Suction Pump. Delivered to Cote d'Ivoire for Sand Pumping
Gravel Pump. Delivered to Cote d'Ivoire for Sand Pumping

The requirements of Cote d’Ivoire’s customer were relatively clear. After our engineers’ professional consultation, we chose ZS400 large particle sand and gravel pump and Hangzhou 600 type 3.5:1 gear box. The customer gave us the diesel engine dimensions size and flywheel size. Then we designed the base and gearbox according to the size. After confirmed all the data, we signed the contract. The customer also purchased some products from other factories in China, these products were delivered to our factory and shipped into the same container with the sand and gravel pump. By this way, the customer save sea freight. The goods were shipped in September, and Our customer was very satisfied with our excellent service and professional knowledge.

Sand and Gravel Pump Specifications

No. Item Products Description
1 Sand and gravel pump
  1. Model: ZS400
  2. Flow: 2736m3/h
  3. Head: 26m
  4. Speed: 400r/min
  5. Inner Diameter: 18 inch
  6. Outer Diameter: 16 inch
2 Gear box Model-600 3.5:1
Base Base for Sand Gravel Pump, Gear Box and Diesel Engine
3 Jet water pump
  1. Flow: 300m3/h
  2. Head: 60m
  3. Speed: 1450rpm
Diesel engine
  1. Type: R6105ZG
  2. Power:100 KW
Diesel Engine Spare Parts 100 KW SET
4 HDPE white pipe
  1. Size: 16 inch
  2. OD: 400MM
  3. ID: 370MM
  4. Length: 11.5mm/pc
Floaters
  1. Size: 16 inch
  2. OD: 1100MM
  3. ID: 400MM
  4. Length: 1200mm/pairs
Rubber hose
  1. Size: 16 inch
  2. Usage: Sand suction and discharge rubber hose
  3. 10 meters/pc
  1. Size: 16 inch
  2. Usage: Flexible rubber hose
  3. 2 meters/pc
5 Valve 16 inch with Flange Rotary for Steel Extension (Y) type
Steel discharge extension(Y) Size: 16 inch

When packing, the customer arranged an inspector to supervise the container loading. The inspector checked the quality and quantity of the goods. Everything was in accordance with the contract.

Slurry Pump. Delivered to Cote d'Ivoire for Sand Pumping
Large Particle Pump. Delivered to Cote d'Ivoire for Sand Pumping

OCEAN Pump had been specialized in designing, manufacturing and supplying sand pump, slurry pump, gravel pump and sand dredger equipment for more than 20 years. With innovative hydraulic and structural design, our main sand pumping over-flow parts are made of the wear resistant high chrome alloy, the sand and gravel pump will have long working life, reliable operation and small vibration, low noise and easy maintain.

We has provided effective sand pumping equipment and dredging equipment to over 60 countries. Our products are widely used for river sand pumping, mining pumping, pond dredging, reservoir dredging, tailing transportation and land reclamation, etc. Our customers are from Southeast Asia like Malaysia and Singapore,  Central Asia like Kazakhstan, South America like Brazil, Africa like Nigeria, Cote d’Ivoire and Cameroon.

About the Author: